Adventure Audio Power Couple
The Adventure Audio Power Couple is a dual boost pedal with one switch which means you tap for boost and hold for more. In fact you can get unto a 25dB boost.
It takes two to tango… and the Power Couple is swinging their way through the crowd, keeping their eyes peeled for their next adventure. Double boost their egos by flattering them with riffs and kisses.
Wait, what?… How does that work?
Tap to bypass or hold for 200mS ( 1/5th of a second ) for More. When More mode is engaged, the LED knob will illuminate adding more gain on top of the already boosted signal.
- Boost 1 is always on at the beginning of your board, it fills out your frequencies and just makes your tone better.
- Boost 2 is your actually boost, set to taste. It drives your drives harder, all that.
- Boost 1 is always on, Boost 2 is always on. Its your drive for your vintage styled amp, yeehaw!
- Boost 1 is after your drives, just as a clean boost, attenuate boost two to be the same volume as boost 1 but its your dirty boost sound.
- Put between drive pedals to push your separate gain stages to taste.
Huge knob controls volume of the first boost
LED knob controls volume of the second boost.
… Pretty simple
So, its a great little pedal that gives a number of different boost options. This pedal is particulate suitable where you already like the basic tone of your amp and the way it overdrives but you need a bit more…. and then a bit more after
Aaron Sternke gives a good demo here.
Requires 9V DC centre negative with 200 ma current draw