Darkglass Microtubes B1K
The Darkglass Microtubes B1K is a CMOS bass overdrive that is a phenomenal tribute to Darkglass’ most legendary distortion circuits. It is in a compact and intuitive format and is great value.
We are proud to introduce our Microtubes B1K distortion pedal, the first of its kind from an all-new lineup.
Controls
- Front Level: Sets the volume of the overdriven signal.
- Front Drive: Sets the amount of saturation in the overdriven signal.
- Back Blend: Mixes the clean input signal with the overdriven signal. The clean signal is fixed at unity gain, while the volume of the overdriven signal is set by the
- Level knob, allowing for fine control of the blend ratio. Turn clockwise to blend in the clean signal.
- Back Tone: Controls the high frequency content of the sound. A variable low pass filter from 3 kHz to 8 kHz. Turn CCW for a brighter sound.
- Back MBoost: Gives a subtle 6 dB boost from 300 Hz to 1 kHz to help you cut through the mix.
- Back Grunt: Provides a low-end boost to massively thicken your sound when engaged.
DIP Switches
- Grunt: Provides a low-end boost to massively thicken your sound when engaged.
- MBoost: Gives a subtle 6 dB boost from 300 Hz to 1 kHz to help you cut through the mix
Technical Specifications
- Input Impedance 1 MΩ
- Output Impedance 1 kΩ
- Current Consumption ~30 mA Voltage 9V DC (Center Negative)
Dimensions: Width 50 mm (2 in) Height 100 mm (4 in) Depth 45 mm (1.75 in) Weight 205 g (0.45 lb)
The Microtubes B1K has a current draw of 30 mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.
Reviews
There are no reviews yet.