Old Blood Noise Endeavors Fault V2 Overdrive Distortion Pedal

Old Blood Noise Endeavors Fault V2

The Old Blood Noise Endeavors Fault overdrive and distortion is the drive you didn’t even know you needed.

It can:

• Push your amp over the edge,
• Provide a sensitive drive for a clean signal, or
• Act as an all-out distortion for your chugging rhythms or singing leads or noise experiments.

A Bypass switch turns it on and off. The volume makes it louder. Gain 1 sets the intensity of the first gain stage, and can go from light and sparkly to tight and crunchy.

Low, Mid, and High each cut or boost their respective frequencies – scoop it, hump it, flatten it, whatever your heart desires. Low is a 100 Hz shelf filter, Mid is 500 Hz bell, and High is 3 kHz shelf.

Gain 2 is activated by the Gain 2 foot switch – if it’s off, it does nothing. If the knob is all the way down, it does nothing. But turn the switch on and the knob up and you’ll find increasingly heavy distortion in a pedal you thought was only an overdrive.

Tweaking the platform of our Fault overdrive/distortion, we’ve carved out room for greater gain range, voice control, and clipping options in the Fault Version 2. The Fault remains a great overdrive with foot-switchable second gain stage and three-band EQ and now excels as a clean boost and tweakable high gain distortion as well.

Fault V2 features:

• Master Volume, Gain, and Voice controls

• Foot switchable second gain stage set by the Gain 2 knob

• Sliders for Low, Mid, and High frequencies

• Boost toggle to set range of Gain 1 knob from clean to mean

• Crush toggle to add an additional post-EQ clipping stage

• Relay bypass switching

Requires 9V 2.1mm negative centre pin power adapter (not included).

Current Draw 31mA